Outdoor Air Temperature Sensor, Overmolded
£3.99 - £4.79
The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.
Product Highlights:
- General purpose outdoor temperature sensor
- Easy installation – two screws secure the sensor to the wall or an electrical box
- Fully potted stainless steel probe protects sensing element and provides fast, accurate temperature sensing
- Cost efficient design
- Sturdy construction – housing is made from a PVC + rubber blend which resists shock even in cold weather
- UV inhibitors resist degradation of the plastic even after many years in direct sunlight
- Operating temperature Range: -40°C to 60°C
Available Options:
Weight | 0.08 kg |
---|---|
Temperature Curve | 10K Type 2, 10K Type 3, 1K PT, 3K |
Related Products
-
Clip On Temperature Sensor
£3.07 - £3.19Availability: In stockOut of stock
We have designed this clip-on temperature sensor for use with refrigerant lines and copper tubing in hydronics applications. The sensor installs easily without drilling and reacts to temperature changes in seconds. Industry standard sensor elements are compatible with all major controls systems.
-
High temperature probe for Floor Heating & Solar applications
£4.79 - £8.22Availability: In stockOut of stock
This temperature probe is suitable for a variety or high temperature applications such as floor heating, solar heating systems and domestic hot water heaters to name a few. The sensor element is housed in a stainless steel probe which is 6mm diameter x 50mm [2in] long. The cable is 4.5 meter long and is a high temperature material that is tough and highly durable.The probe is available with custom thermistors and Pt elements, nearly all the popular ranges are available with very small minimum order quantity.
-
Probe Temperature Sensor
£1.76 - £3.03Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 15mm Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
-
Duct Temperature Sensor – Flange Mount
£3.99 - £6.94Availability: In stockOut of stock
This sensor is used to measure the supply and return temperature in HVAC system. The flange mount design makes it easy to install the sensor in tight quarters. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. The probe in the photo is our standard model which is always in stock, it has a 8″ probe and a 120″ cable, and employs either a precision thermistor or platinum film sensor, so field calibration is not required. The 10ft(3m) cable is “Plenum Rated”.
-
Tamper Proof room temperature sensor
£3.99 - £4.79Availability: In stockOut of stock
The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.
-
Duct Averaging Temperature Sensor
£31.12 - £50.27Availability: In stockOut of stock
The sensor measures temperature in stratified air such as the mixing sections of air handlers. The sensor has a standard 10k type 2 temperature-resistance curve compatible with all major control systems.
-
Platinum Temperature Sensor
£19.95 - £23.94Availability: In stockOut of stock
This Probe Temperature Sensor is a 1K Platinum coming standard with an 8″ length Stainless Steel Temperature Sensor.
-
RTS Wall and Bead Sensors
£0.80 - £2.79Availability: In stockOut of stock
The room sensors are used to provide reliable, accurate temperature readings in surface-mount room environments, Energy Management Control Systems, compatible with all the leading control systems.They feature a standard plastic ventilated enclosure.
-
Thermowells
£4.39 - £6.78Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.